Information on projects

How do I prepare designs for print?

Remember: printed materials will not always look the same as they do on your computer monitor - this is due to the different calibration of the monitor itself, as well as the different colour spaces that apply to RGB monitors and CMYK, Pantone and in-house systems for printing.

The following parameters and specifications for prints are guidelines for advertising agencies or graphic designers developing projects. If you do not have the data indicated below or are unable to prepare a design, please send us the materials you have. A design is prepared on the basis of both professional data and non-professional orders. The price of each printed product includes the design and a maximum of one design revision. Further possible design work and changes to the layout concept will be subject to an additional charge. (The fee depends on the time spent by the graphic designer: 60 min. of graphic designer work = 60 PLN/net)

- file supplied in vector format (cdr up to version 14, eps, pdf) or single-colour bitmap (1 bit, 1000 dpi)
- format 1:1
- fonts converted to curves
- non-standard colours defined according to the PANTONE template for coated papers (C)
- minimum line width of 0.076 mm or 0.15 mm in the negative
- minimum font height 0.5 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width of 0.2 mm or 0.4 mm for negatives
- minimum font height 1 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width 0.1 mm or 0.3 mm on negative side
- minimum font height 1 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width 0.2 mm or 0.4 mm on negative side
- minimum font height 1 mm

- colour code CMYK
- format 1:1
- file provided in vector format (cdr up to version 14, eps, pdf) or bitmap (300 dpi)
- fonts converted to curves
- minimum line width of 0.076 mm or 0.15 mm in the negative
- minimum font height 0.5 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width 0.076 mm or 0.15 mm for negative
- minimum font height 0.5 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width 0.2 mm or 0.35 mm on negative side
- minimum font height 1 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width 0.2 mm or 0.45 mm on negative side
- minimum font height 1.5 mm

- file provided in vector format (cdr up to version 14, eps, pdf)
- format 1:1
- fonts converted to curves
- minimum line width 0.25 mm or 0.35 mm on negative side
- minimum font height 1 mm

- file supplied in vector format (cdr up to version 14, eps, pdf) or dimensioned raster file in CMYK colour palette
- format 1:1
- fonts converted to curves
- minimum line width of 0.15 mm, or 0.5 mm on the negative side
- minimum font height 1.2 mm or 2.5 mm negative

- file provided in vector format (cdr up to version 14, eps, pdf) or dimensioned raster file in CMYK colour palette
- format 1:1
- fonts converted to curves
- minimum line width 0.1 mm or 0.35 mm for negative
- minimum font height 0,85 mm or 1,4 mm negative

- file provided in vector format (cdr up to version 14, eps, pdf) or dimensioned raster file in CMYK colour palette
- format 1:1
- fonts converted to curves
- minimum line width of 0.076 mm or 0.2 mm in the negative
- minimum font height 0.8 mm or 1.3 mm negative